System Development/Field Test/ Commercialization

Biodegradable sorbent that captures nutrients in water. Phosphorus and nitrogen are nutrients in water that act as fertilizers for aquatic plants. Eutrophication occurs when there is an overabundance of these nutrients. Nutrient pollution occurs when eutrophication produces an excessive amount of algae. These algae disrupt ecosystems by lowering the amount of dissolved oxygen in water, reducing water quality, turning the water green, causing a foul smell, blocking sunlight, and harming animals and humans who consume it.

Three-step process for reverse osmosis that achieves high-rate water extraction within a low-energy continuous process. Water and salt separation is accomplished with a draw solution called Switchable Water Salt (SWS) and heat. This system extracts the greatest amount of water from the most challenging process streams while using the least amount of energy. Reduced greenhouse gases by up to 40% compared to conventional disposal methods. The process also reclaims up to 90% of the freshwater from the waste stream.

Water treatment system designed to control corrosion, deposition, and biological fouling without "bleed-off." Significant reduction in water usage compared to conventional methods because this system does not require makeup water in cooling systems. Bleed-off is the process of flushing water with high mineral concentrations down the drain and diluting the system water mineral concentrations with fresh water to prevent precipitation. From current data in Philadelphia, treating 30,000 tons of cooling water with this system saved about 132 million gallons of water.

Large-scale anaerobic biotreatment system. Asarco's biotreatment system consists of a settling basin and two anaerobic bioreactors discharged into a rock filter polishing cell that are followed by a final aeration polishing pond. Heavy metal pollution occurs when excavated rocks or exposed underground mines get into water. The West Fork Biotreatment plant does not require conventional chemicals often associated with sludge formation nor constant human monitoring and frequent sludge disposal.

Sulfonated polymer membrane technology for cheaper and less energy-intensive water desalination. This technology can withstand higher pressures, allowing for higher water flux and transport rates. These higher rates increase efficiency while lowering costs. The membrane's structure gives it ion selectivity, low electrical resistance, wet and dry mechanical strength, and good dimensional stability in wet and dry conditions. The membrane's resistance to chlorine also makes it a better option than conventional materials that lack chlorine resistance because it avoids the pretreatment process.

A high-friction coating that keeps carpet tile in place without additional adhesives, floor sealers, or primers. Eliminates the need for adhesives and reduces labor costs. Reduces materials needed for installation by eliminating the need to primer or seal the floor. The lack of adhesives reduces installation time by eliminating the drying process. Eliminates unnecessary waste, such as peel-and-stick film covers. Eliminates VOC off-gassing, typically associated with floor sealants, improving air quality. Functional under high water vapor emissions.

Sustainable textiles additive that creates biodegradable spots in the matrix of plastic by combining it with polyester and nylon at the beginning of the fiber-making process. The biodegradation process is non-toxic to marine life. Process is easy to implement in existing manufacturing. Integrity, durability, and performance of fibers are maintained. Fibers and yarns are traceable through the CiCLO® Certificate of Authenticity program. CiCLO® is only activated in conditions where biodegradation can naturally occur.